Do Not Apply Wallpaper To Textured Surfaces

STEP 1

Before starting your installation, make sure you have all the tools for your project. Cleaning gloves, level, a sponge, measuring tape, plastic smoother, soft rubber roller, razor blade, cleaning solution and a pencil.

 

 

STEP 2

Prior to application, remove dirt or particles from surface. Extremely dirty surfaces may require washing before installation, however the surface must be completely dry before wallpaper is applied.

Note: Recommended minimum application temperature is 50 degrees F.

 

 

STEP 3

Peel a 3-4: strip of liner from the back side of the wall paper.
Crease the liner being careful not to touch the adhesive.

 

 

STEP 4

Orient the wallpaper to the surface and gently apply exposed adhesive surface. Slowly continue to apply the wallpaper by removing the balance of the liner as you hand apply. Do not remove the entire liner before applying as this may cause excessive air bubbles.

 

 

STEP 5

Use a soft rubber or squeegee to the surface of the graphic to remove any air bubbles making sure you are getting 100% adhesion to the surface.

 

 

STEP 6

To remove your Peel & Stick wallpaper, simply lift one corner and continue to pull back slowly. In most cases the wallpaper will come off in one piece.